Start your search for 2009 Drives and Storage

Showing posts with label Articles. Show all posts
Showing posts with label Articles. Show all posts

SSD Drive Explained In Brief

The Solid State Drive was developed in the early 1980s but due to cost it was mainly used by the military for enhanced performance in their large databases. This growing technology has since expanding to our everyday life with phones cameras and iPods. With the speed ratio of the HDD at 5,000 to 10,000 micro-seconds and the SSD 35 to 105 micro-seconds, which has made it standard for defence applications. With the known reliability by cutting down heat, vibration and using less energy from no moving parts, most of the mobile units used will be using this design. A recently developed inductive coupling wireless communication technology ism purported to have the capacity to reduce SSDs internal wiring requirement and use of power by half. The changing of the market and the cost of producing HDD can exceed SDD by costing twice as much. The capacity with a conventional HDD is about 2 TB and Hatachi is aiming to produce 4 TB using new nanometer recording technology.

Companies Investing in the Future of SSD Drive

With increasingly more companies using SSD for communication and wireless devices you can expect to see this technology in most of your companies computers and mobile devices in the coming years. Banks, police and your local counties are implementing this technology into their systems for processing information twice as fast is was previpously possible. The military, like the Air Force, Navy and Army have been using this technology in their computers since the early 1980s. So most of your military applications such as satellites, naval vesicles and Missiles are using the SSD to relay processed information quicker. Before too long the SDD technology will replace all of the HDD hard drives due to their lower cost ands increased life expectancy. With the speed, cost efficacy and energy savings it is no wonder companies are investing in switching their networks to a SSD hard drive.

view more......

Netbook Purchase Tips

Netbook is the novel and hottest craze in portable computing, as lugging a 17`` laptop everywhere can be neatly replaced by buying an ultra portable netbook. Conversely, shopping for a netbook is best by following some buying tips.

Identifying computing needs: This is an immense factor worth considering and needs proper thinking and planning about using the netbook and the related software that you need. This depends on the fact about using it for web surfing or checking email or doing some serious jobs such as video editing or graphic designing. Netbook is appropriate for lower intensive tasks that comprises of web browsing, email checking and replying, besides office applications. A netbook with full size is recommended for jobs that are processor intensive.

Portability features: Carrying a netbook around involves comprehending the size and weight as the main factor. Netbook is available in plenty of sizes, but definitely is tiny and weights less in comparison to the bulky laptops. The portability features certainly is favorable only when the netbook is light in weight and small in size. The battery size and weight also requires to be considered as some power adaptors come heavy and large in size.

Comprehending the storage types: Types of netbook available in the market should be comprehended as it helps in selecting the desired to suit the needs and wants of the buyer. Netbook comes in SSD and HDD storage types such that SSD, the Solid State Drives boot faster, possess withstanding impact and is a bit faster in performance, but is notorious for low storage. Contrarily, HDD, the Hard Disk Drives netbook stores up to 160GB data, but are weaker withstanding impacts in comparison to their counterparts, SSD. Buying a fast netbook with less storage capacity or a netbook offering high capacity, but is slow in booting depends completely on the desire and need of the buyer.

Considering the netbook`s brand: Considering the brand before purchasing is essential as the market today is filled with numerous brands of netbooks. However, good brands such as ASUS certainly carry high repute, and are followed by many more manufacturers of netbook such as Acer, Dell, HP, Lenovo and MSI. These manufacturers vary in their signatures and a buyer should know these details prior to purchase, such as ASUS have small keyboards. It is necessary to know the different brand netbooks as well as their differences, and this can be understood by researching in the internet with patience.

Operating system: Similar to the desktop computers having Mac and Windows as operating system competitors, the netbook has Windows XP and Linux for competition. The netbook models are shipped by different manufacturers with an operating system, and hence every netbook is either featured with a Windows XP or Linux version. However, Linux version netbooks are well-known for their security and stability, while the Windows XP netbooks have gained the topmost popularity. Compatibility of versions is a must and hence a buyer usually opts for Windows XP netbook, as it is tough to switch paradigms facilitating Linux.

Reading reviews: User reviews play a vital role in determining the performance of some netbooks. Manufacturers do not leave any opportunity in hyping their product so that their sales are boosted. But, reading the reviews will assist in knowing the value or the rundown of a netbook model. Reading independent reviews of products offered in online computer magazines and searching the internet for more reviews will give valuable information about a product to be purchased.

Comparison: Settling for a shopping website at the first attempt is not recommended. Comparing prices from minimum three or five netbook sellers is the best before placing the order. Comparison is required as some websites offer the netbooks cheaper as they deal on wholesale orders, while others do the same and sell second hand netbooks. If buying online, make sure the you are dealing with a trusted website.

view more......

Against ATA SATA

Hard Disk Drives: compared with the ATA SATA
The results of the computer system was faster processor, memory and video cards are currently being developed. An important component is often ignored, if they focus on improving the performance of a computer system is the hard drive. HDD manufacturers is constantly changing the basic hard drive used in modern computer systems in the past 25 years, and over the past few years there have been some interesting developments, faster, larger caches, better reliability and speed of data transmission.

The disk is used in most computers, is the degree of consumer wealth ATA type drive (usually one IDE disk). ATA standard dates back to 1986 and is based on a 16-bit parallel interface has a lot of changes since its introduction in the speed and size of units that can support it. The final standard ATA-7 (for the first time in 2001, the Technical Committee T13 (a group responsible for the standard ATA)), for data transfer rates up to 133MB/sec. It was expected that last updated the parallel ATA standard.

Already in 2000, it was found that the Parallel ATA standard was up to its limits, that they can. With data transfer rates with the 133MB/sec mark on the parallel cable, you will be invited to all sorts of problems because of signal timing, EMI (electromagnetic interference) and other questions about the integrity of the data, so that the leaders of the industry to meet and develop a new standard, known as Serial ATA (SATA). SATA has been around a few years, but is destined to be "the norm", since a number of advantages, which are used in the Technical Board of Appeal.

Both technologies are: ATA (Advanced Technology Application), 16-bit parallel interface for computer control. Introduced in 1986, has a lot of changes over the past 18 years, with the latter option is the ATA-7. If any question as ATA device as a parallel ATA device. ATA devices, also known as IDE, EIDE, Ultra ATA, Ultra DMA, ATAPI, PATA, etc. (all of these acronyms actually refer to very specific, but they are often used interchangeably) SATA (Serial Advanced Technology Application) 1 - Participation in physical development with the Parallel ATA storage interface.

Key features and links

SATA drives easy to distinguish from their ATA cousins in different data and power connections on the back of the device. A side-by-side comparison of the two interfaces can be found in this PDF from Maxtor, and the following covers many of the differences

ATA-standard, as this model is 200 GB Western Digital, are a bit bulky, two inches wide and 40-pin data cable and 5V to the familiar 4-pin connector. The basic data cables for these drives have been around for many years. This change was the introduction of ATA-5 standard to improve the quality of the signal through a cable 80 in a 40-pin connector (they are usually referred to as 40-pin/80-wire cable). To improve the airflow in the computer system some manufacturers have taken literally folding over the cable, and the inclusion of this position. Another recent physical change also with the advent of rounded cables. The performance of the rounded cables is equal to the apartment, but many prefer the improved air circulation, ease of wire, and cooler appearance that they are.

SATA, as this model is 120 GB Western Digital, have half an inch width 7 "and width of the blade" data connections, resulting in a much thinner and easier to process the data cable. These cables, the convenience of the ATA rounded cables to the next level by using smaller, more flexible and can not, without fear of data loss. SATA cables have a maximum length of 1 meter (39.37 cm), which is significantly higher than the recommended 18-inch cable for ATA drives. Reducing the impact of SATA data space on motherboards, potentially more space for convenience and more functions on board!

A 15-pin connector provides 250mV of necessary power to SATA drives. 15-pin SATA device appears much greater than the power cord 4-pin ATA device, but in reality the two power connectors are nearly the same height. Currently, many SATA drives also equipped with a legacy 4-pin power connector for convenience.

Many modern motherboards, such as a chain of tech motherboard with on board hard disk SATA (many of ATA ports and legacy drive compatibility), and new food sources, such as this Ultra X - a connection, as a rule, some of the necessary 15-pin power connectors, the use of these devices in new systems. Older systems can easily switch from SATA drives using adapters such as PCI-SATA controller and 4-pin 15-pin SATA adapter.

Optical drives are also more easily with SATA connections. Units of measurement, such as the PLEXTOR PX-712SA, to use the new interface, although no more than a comparable optical drives with ATA connection.

Performance

In addition, more convenient to install and drawing less power, SATA performance gains, in fact, that is different from the ATA.

The most interesting feature of SATA power is the greatest possible bandwidth. As we have already determined the evolution of ATA drives, data transfer rate reaches its maximum of 133 MB / sec, where the current SATA standard provides data transfers up to 150 MB / sec. Increase the overall efficiency of ATA SATA can now be expected that up to 5% (by Seagate), but improvements in SATA technology will improve in this regard.

SATA is the future of great things for those who want even greater speed, as well as a device with 300 MB / s transfer rate (SATA II) in 2005 and 2008 at speeds up to 600 MB / sec can be expected. These incredible speed and it is difficult to predict at this time.

Another advantage of the performance of SATA drives is built-in hot swap capabilities. SATA and offline, without a break in the system, for those who can not afford the time and you want to move in and out of operation quickly. The largest number of wires in the power supply part of the same, while six out of fifteen for the cable, the hot swap function.

Price
Comparison of ATA to the SATA can be tricky, since all the variables, but, as the case that SATA drives will still cost only slightly more than in the ATA-compatible disks. The gap quickly, but as SATA drives gain popularity and availability of price changes can be expected. Taking into account the advantages of SATA over ATA, the potential difference of a few dollars can be justified when you upgrade. Geeks group currently has only a limited selection of disks SATA, but several technical sites, such as equipment and technology room, we present a real-time prices, to see how comparable units.

Final words
The current SATA standard provides significant benefits in the ATA in terms of comfort, and especially energy efficiency. Main ATA is on their side this time is history, as it is the norm for so long that they do not disappear in the near future. The future of SATA will be even more interesting to increase the speed of the hard drive to develop along with other system components.

view more......

  © Blogger templates The Professional Template by Ourblogtemplates.com 2009, Modified by FotonVideo.com

Back to TOP